This note describe how to operate the Agilent 1100/1200/1260 Series Capillary Pump (G1376A) in Normal flow mode.
General
Agilent technologies 1200 series Pdf User Manuals. View online or download Agilent technologies 1200 series User Manual.
Roto-die hydraulic bender model 10 users manual. The U-strap pin must seat on its handle.Do Not Attempt to Use Damaged Components: Should any part of the Mini-Eegor™ bender become damaged for any reason, replace it before resuming bending operations. Nevertheless, when amachine is powered with ten tons of force, certain precautions must be exercised to keep that force under control at all times.Fully Assemble All Load-bearing Pins: Unless all pins are fully engaged in their respective sockets, the resulting misapplied loads can deform and destroy the bender, with associated danger to attending personnel.1. All four axles of the compression roller plate assembly must project through, or be flush with, both plates. The top aluminum load arm must be fully seated so that three pins project through it with the chamfered rollerengaging the slot.3. The Mini-Eegor™ bender was designed with personal safety in mind.
The capillary pump is designed to deliver solvent within a wide flow range. The settable column flow ranges are:
Agilent 1200 Series Manual
The pump operation modes for the three flow ranges are different.
• For the first and second range the pump operates in the 'micro mode'. In this mode the Electronic Flow Control (EFC) is active to control the column flow.
• In the third range the pump operates in the 'normal mode'. In this mode the EFC is inactive. For best performance we recommend to bypass the EFC unit and install the purge valve.
Agilent 1200 User Manual
Users who want to run their capillary LC in normal mode need to order the '0.1 to 2.5 mL/min flow capillary kit', part number 5065-4495. Instructions which come with the kit are attached. This will allow a flow rate of up to 2.5 ml/min.
Agilent 1200 Hplc User Manual
41858
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |